When opened, the LIGHTSOURCE01EVM GUI, provides the Light Source Control panel to the user, where the characteristics of the light source can be adjusted.

Figure 2-9 Light Source Control Panel

Clicking the LED Power box, , switches the power source on and off.

To change the LIGHTSOURCE01EVM from sunset to noon modes, click on the drop-down menu and select the desired mode.

Figure 2-10 Mode Drop-Down Menu

To adjust the brightness level, you can enter a lux value into the value box or click the up or down arrows to increment or decrement the illuminance level.

Figure 2-11 Lux Value Box

The second panel includes information about the light source, such as the temperature read from the on-board temperature sensors, listed as junction and sensor board temperatures. Additionally, the lamp hours, EVM serial number, and calibration serial number are also listed.

Figure 2-12 Light Source Info Panel

For a more detailed software guide, refer to Section 3.