over operating free-air temperature range (unless otherwise noted)(1)
|
MIN |
MAX |
UNIT |
Input bias pin supply voltage |
VCCI to GND |
–0.3 |
6 |
V |
Driver bias supply |
VDDA-VSSA, VDDB-VSSB |
–0.3 |
30 |
V |
Output signal voltage |
OUTA to VSSA, OUTB to VSSB |
–0.3 |
VVDDA+0.3,
VVDDB+0.3 |
V |
OUTA to VSSA, OUTB to VSSB, Transient for 200 ns(3) |
–2 |
VVDDA+0.3,
VVDDB+0.3 |
V |
Input signal voltage |
INA, INB, DIS to GND |
–0.3 |
VVCCI+0.3 |
V |
Junction temperature, TJ
(2) |
–40 |
150 |
°C |
Storage temperature, Tstg |
–65 |
150 |
°C |
(1) Operation outside the Absolute Maximum Ratings may cause
permanent device damage. Absolute Maximum Ratings do not imply functional
operation of the device at these or any other conditions beyond those listed
under Recommended Operating Conditions. If outside the Recommended Operating
Conditions but within the Absolute Maximum Ratings, the device may not be fully
functional, and this may affect device reliability, functionality, performance,
and shorten the device lifetime.
(2) To
help
maintain the recommended operating conditions for
T
J, see the
Section 6.4.
(3) Values are verified by characterization and are not production
tested.