SLUU943A May   2012  – December 2021 TPS53014

 

  1. Introduction
  2. Description
    1. 2.1 Typical Applications
    2. 2.2 Features
  3. Electrical Performance Specifications
  4. Schematic
  5. Test Setup
    1. 5.1 Test Equipment
    2. 5.2 Recommended Test Setup
  6. Configurations
    1. 6.1 Enable/Disable Switch S1
  7. Test Procedure
    1. 7.1 Line/Load Regulation and Efficiency Measurement Procedure
    2. 7.2 List of Test Points
    3. 7.3 Equipment Shutdown
  8. Performance Data and Typical Characteristic Curves
    1. 8.1 Efficiency
    2. 8.2 Load Regulation
    3. 8.3 Line Regulation
    4. 8.4 Load Transient
    5. 8.5 Output Ripple
    6. 8.6 Switching Node
    7. 8.7 Enable Start-Up
    8. 8.8 Disable
    9. 8.9 Thermal Image
  9. EVM Assembly Drawing and PCB Layout
  10. 10List of Materials
  11. 11Revision History

List of Test Points

Table 7-1 Test Point Functions
TEST POINTSNAMEDESCRIPTION
TP1VINInput voltage
TP2GNDGND
TP3VREG5Output of 5-V linear regulator
TP4SSSoft-start ramp voltage
TP5ENEnable pin
TP6SWSwitching node
TP7VOUTOutput voltage
TP8GNDGND
TP9GNDGND
TP10GNDGND