米6体育平台手机版

SLUUC44A July 2019 – December 2022 TPSM82810 , TPSM82813 , TPSM82816

TPSM8281xEVM-089 Evaluation Module
Trademarks
1Introduction
1. 1.1 Performance Specification
2. 1.2 Modifications
2Setup
1. 2.1 Hardware Setup
2. 2.2 Input, Output Connector, and Jumper Descriptions
3Safety Instructions
4TPSM8281xEVM-089 Test Results
5Board Layout
6Schematic and Bill of Materials
1. 6.1 Schematic
2. 6.2 Bill of Materials
A Appendix - Rev.A EVM
1. A.1 Rev.A - Setup
  1. A.1.1 Rev.A - Connector Descriptions
  2. A.1.2 Rev.A - Hardware Setup
2. A.2 Rev.A - Board Layout
3. A.3 Rev.A - Schematic and Bill of Materials
  1. A.3.1 Rev.A - Schematic
  2. A.3.2 Rev.A - Bill of Materials
B Revision History

1.2.3 Soft-Start Time

C4 controls the soft-start time of the output voltage. C4 can be changed for a faster or slower ramp-up of the output voltage. Note that the soft-start time is different (with the same C4 value) for the TPSM82810 and TPSM82816.