SLUUCC3 february 2021 BQ79631-Q1
The 10-pin J10 - Serial connector is used to connect the EVM to a PC running the GUI or to a host controller. Texas Instruments recommends using the USB2ANY (available to order through TI.com), which includes the proper 10-pin cable.
Designator | Manufacturer | Part Number | Mating Connector |
---|---|---|---|
J10 | Samtec Inc. | Manufacturer: TSW-105-08-L-D-RA | 10-pin ribbon connector packaged with USB2ANY |
Pin | Name |
---|---|
1 | NC |
2 | NC |
3 | NFAULT signal from BQ79631-Q1 |
4 | NC |
5 | GND |
6 | USB2ANY 3.3 V |
7 | USB2ANY TX (RX of BQ79631-Q1) |
8 | USB2ANY RX (TX of BQ79631-Q1) |
9 | NC |
10 | NC |