SLUUCC3 february 2021 BQ79631-Q1
The EVMs are connected using a standard wire jumper; Table 4-1 shows the connections between the two EVMs. By default, the TMS570 LaunchPad is powered by the USB port on the host computer.
Connection Name |
EVM |
TMS570 LaunchPad |
---|---|---|
TX | J11 pin 5 | J2 pin 3 (UARX) |
RX | J11 pin 4 | J2 pin 4 (UATX) |
nFAULT | J11 pin 2 | J2 pin 5 (PA7) |
GND | J11 pin 1 | J3 pin 2 (GND) |