SLUUCC4A October 2020 – September 2021 TPS92520-Q1
Table 2-1 provides the EVM electrical performance specifications.
| Parameter | Description | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Input Characteristics | |||||
| Voltage, VIN | The EVM is designed to operate at above 40 V, but can be setup to operate at lower input voltages if J11 is not loaded and the VBIAS test point is connected to an external supply that is less than 40 V or attached to VIN test point if VIN is less than 40 V. | 4.5 | 50 | 65 | V |
| Maximum Input Current, IIN | 4 | A | |||
| Output Characteristics | |||||
| Output Voltage, VOUT | Maximum voltage configured by the output voltage divider and programmable by the SPI | VIN | 60 | V | |
| Maximum Output Current, IOUT | Total output current per channel | 1.6 | A | ||
| Maximum Output Power, POUT | Total output power | 120 | W | ||
| Systems Characteristics | |||||
| Switching frequency | Switching Frequency (fSW) Range | 100 | 2,200 | kHz | |
| Peak efficiency | 96 | % | |||
| Operating temperature | –40 | 25 | 125 | °C | |