Use the following to set up the EVM testing software:

1. On the computer connected to the EV2400 interface board, launch Battery Management Studio (BQStudio). Select Charger as seen in Figure 2-2.
   Figure 2-2 BQStudio Device Type Selection Window
2. Select the appropriate configuration file based on the device from the window shown in Figure 2-3.
   Figure 2-3 BQStudio Charger Selection Window
3. Choose , on the window that appears, and the main window of the BQ25620/2 EVM software will appear, as shown in Figure 2-4.

Figure 2-4 Main Window of BQ25620/2 EVM Software