SLUUCK5 November 2021 TPS92623-Q1
The EVM has the following connectors. Table 2-1 shows their functions.
| Connector | Description |
|---|---|
| Vbat | This connector is a power supply input. |
| GND | This connector is a device part ground. |
| TP1 | Vbat. This connector shows the positive input supply voltage. |
| TP2 | Fault. This connector is the FAULT status output of the LED driver. |
| TP3 | This connector is LED part ground. |
| TP4 | This connector is device part ground. |