This section provides the test conditions for the CE and RE measurements.

• Input supply:
  • Fully charged 12-V car battery

• Load on load switch evaluation module:
  • Common Use Load, 125 Ω (40 mA)
  • Maximum Current, 25 Ω (200 mA)

• Antenna configurations for radiated emission measurements
  • Monopole: 150 kHz–30 MHz
  • Biconical (Horizontal/Vertical): 30 MHz–200 MHz
  • Log Periodic (Horizontal/Vertical): 200 MHz–1 GHz

Table 1-1 shows EMI receiver settings for the conducted emission measurements.

Table 1-2 shows EMI receiver setting for the radiated emission measurements.