米6体育平台手机版

SLVK164 December 2023 TPS7H2211-SP

PRODUCTION DATA

3.2 TPS7H2211-QMLP Datasheet Electrical Parameters

Parameter	Test Conditions	MIN	TYP	MAX	Unit	Specification ID	Test Number
POWER SUPPLIES AND CURRENTS
VIN_UVLOR		3.2	3.4	3.8	V	VIN_UVLO_RISE	5.0
VIN_UVLOF		2.6	2.9	3.2	V	VIN_UVLO_FALL	5.1
HYST_VIN-UVLO			0.55	0.75	V	VIN_UVLO_HYST	5.2
I_Q	IOUT = 0 mA, EN = 7 V, IOUT = 0 mA, EN = 7 V		5	10	mA	IQ_VIN	3.0
I_F	EN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 14 V		1	1.3	mA	FORWARD_LEAKAGE	4.9
I_F	EN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 12 V		0.65	0.94	mA	FORWARD_LEAKAGE_12V	4.7
I_F	EN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 9 V		0.15	0.49	mA	FORWARD_LEAKAGE_9V	4.5
I_F	EN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 4.5 V		0.04	0.23	mA	FORWARD_LEAKAGE_4p5V	4.1
I_SD VIN	EN = 0 V, VOUT = 0 V, measured VIN current, VIN = 14 V		6.9	10	mA	ISD_VIN_14V	4.8
I_SD VIN	EN = 0 V, VOUT = 0 V, measured VIN current, VIN = 12 V		5.9	9.5	mA	ISD_VIN_12V	4.6
I_SD VIN	EN = 0 V, VOUT = 0 V, measured VIN current, VIN = 9 V		4.4	8	mA	ISD_VIN_9V	4.4
I_SD VIN	EN = 0 V, VOUT = 0 V, measured VIN current, VIN = 4.5 V		3.7	7	mA	ISD_VIN_4p5V	4.0
V_{RCP_ENTER}	EN = 7 V, VIN = 4.5 V		390		mV	NS92N7_1
V_{RCP_ENTER}	EN = 7 V, VIN = 14 V		363		mV	NSPQQO_1
V_{RCP_EXIT}	EN = 7 V, VIN = 4.5 V		264		mV	NSMFME_1
V_{RCP_EXIT}	EN = 7 V, VIN = 14 V		249		mV	NSY0QQ_1
t_RCP	EN = 7 V, VIN = 4.5 V		208		µs	NS8C9O_1
t_RCP	EN = 7 V, VIN = 14 V		247		µs	NSOWO7_1
I_RCP	EN = 0 V, VOUT = 0 to 14 V and VOUT > VIN, EN = 0 V, VOUT = 0 to 14 V and VOUT > VIN		44	250	µA	IRCP_EN_0V	3.1, 3.3
I_RCP	EN = 7 V, VIN = 0 V, VOUT = 0 to 14 V, EN = 7 V, VIN = 0 V, VOUT = 0 to 14 V		37	240	µA	IRCP_EN_7V	3.4, 3.5
SOFT START
I_SS			65	83	µA	SS_I_Charge	6.3, 6.7
ENABLE (EN) INPUT
V_IHEN		0.59	0.63	0.67	V	EN_VTH_RISING_PLASTIC	6.0, 6.4
V_ILEN		0.49	0.52	0.55	V	EN_VTH_FALLING_PLASTIC	6.1, 6.5
HYST_EN		95	106	116	mV	EN_HYST_PLASTIC	6.2, 6.6
t_{LOW_OFF}	VOUT falls to < 90%	47			µs	EN_LOW_TIME_CYCLING_PLASTIC
VIN_EN		75%				VIN_EN_PERCENTAGE
I_EN	EN = 7 V, VIN = 14 V, EN = 7 V, VIN = 14 V		2	12	nA	IEN_VIN	6.8, 6.9
OVERVOLTAGE PROTECTION (OVP)
V_OVPR		1.07	1.15	1.22	V	OVP_VTH_Rising_PLASTIC	7.0, 7.3
V_OVPF		1.04	1.12	1.19	V	OVP_VTH_Falling_PLASTIC	7.1, 7.4
HYST_OVP	4.6 V < VIN < 14 V, 4.6 V < VIN < 14 V	24	28	33	mV	OVP_HYST_PLASTIC	7.2, 7.5
I_OVP	OVP = 7 V, OVP = 7 V		1.5	12	nA	OVP_ILEAK	7.6, 7.7
CURRENT LIMIT
I_{L_trip}	VIN = 12 V, CSS = 2 nF, VIN = 12 V, CSS = 2 nF		8		A	NSFVE3_1
I_{L_peak}	VIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH, VIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH		25		A	FTO_Current_Limit
t_ftr	VIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH, VIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH		2.3		µs	Current_Limit_Timer
t_fto	VIN = 12 V, CSS = 2 nF, VIN = 12 V, CSS = 2 nF		51		µs	FTO_OFF_TIME
THERMAL SHUTDOWN
Thermal shutdown			155		°C	Thermal_SHDN
Thermal shutdown hysteresis			20		°C	Thermal_SHDN_Hyst
RESISTANCE CHARACTERISTICS
R_ON	VIN = 14 V, I_out = 3.5 A, 25°C		44.3	46	mΩ	RON_VIN_14V_25_Plastic	8.4
R_ON	VIN = 12 V, I_out = 3.5 A, 25°C		44	46	mΩ	RON_VIN_12V_25_Plastic	8.3
R_ON	VIN = 9 V, I_out = 3.5 A, 25°C		43.6	45	mΩ	RON_VIN_9V_25_Plastic	8.2
R_ON	VIN = 6 V, I_out = 3.5 A, 25°C		43.5	45	mΩ	RON_VIN_6V_25_Plastic	8.1
R_ON	VIN = 4.5 V, I_out = 3.5 A, 25°C		47.6	49	mΩ	RON_VIN_4P5V_25_Plastic	8.0