SLVK177 August   2024 TPS7H5004-SP

 

  1.   1
  2.   2
  3.   Trademarks
  4. 1Device Information
    1. 1.1 Product Description
    2. 1.2 Device Details
  5. 2Total Dose Test Setup
    1. 2.1 Test Overview
    2. 2.2 Test Description and Facilities
    3. 2.3 Test Setup Details
      1. 2.3.1 Unbiased
      2. 2.3.2 Biased
    4. 2.4 Test Configuration and Condition
  6. 3TID Characterization Test Results
    1. 3.1 TID Characterization Summary Results
    2. 3.2 Specification Compliance Matrix
  7. 4Applicable and Reference Documents
    1. 4.1 Applicable Documents
    2. 4.2 Reference Documents
  8.   A Appendix: Specifications Requiring Clarification
  9.   B Appendix: HDR TID Report Data

Specification Compliance Matrix

Table 3-1 TPS7H5004-SP QMLP Electrical Parameters Table
PARAMETERTEST CONDITIONTPS7H5004-SP QMLP DATA SHEETTEST #
MINTYPMAXUNIT
SUPPLY VOLTAGES AND CURRENTS
IDD Operating supply currentfSW = 500 kHz, No load for OUTA, OUTB, SRA, and SRB

6.25

8

mA

5.24 __IDD_ACT_500K_NOLOAD_4V, 5.25 __IDD_ACT_500K_NOLOAD_5V, 5.26 __IDD_ACT_500K_NOLOAD_12V, 5.27 __IDD_ACT_500K_NOLOAD_14V

fSW = 1 MHz, No load for OUTA, OUTB, SRA, and SRB

6.75

9.5

mA

5.28 __IDD_ACT_1M_NOLOAD_4V, 5.29 __IDD_ACT_1M_NOLOAD_5V, 5.30 __IDD_ACT_1M_NOLOAD_12V, 5.31 __IDD_ACT_1M_NOLOAD_14V

fSW = 2 MHz, No load for OUTA, OUTB, SRA, and SRB

8.5

13.5

mA

5.36 __IDD_ACT_2M_NOLOAD_4V, 5.37 __IDD_ACT_2M_NOLOAD_5V, 5.38 __IDD_ACT_2M_NOLOAD_12V, 5.39 __IDD_ACT_2M_NOLOAD_14V

fSW = 500 kHz, CLOAD = 100pF for OUTA, OUTB, SRA, and SRB

7.5

9.5

mA

5.48 __IDD_ACT_500K_4V, 5.49 __IDD_ACT_500K_5V, 5.50 __IDD_ACT_500K_12V, 5.51 __IDD_ACT_500K_14V

fSW = 1 MHz, CLOAD = 100pF for OUTA, OUTB, SRA, and SRB

9

12

mA

5.52 __IDD_ACT_1M_4V, 5.53 __IDD_ACT_1M_5V, 5.54 __IDD_ACT_1M_12V, 5.55 __IDD_ACT_1M_14V

fSW = 2 MHz, CLOAD = 100pF for OUTA, OUTB, SRA, and SRB

14

19.5

mA

5.60 __IDD_ACT_2M_4V, 5.61 __IDD_ACT_2M_5V, 5.62 __IDD_ACT_2M_12V, 5.63 __IDD_ACT_2M_14V

IDD(dis) Standby current

EN = 0V

3

mA

5.1 __IDD_DIS_4V, 5.2 __IDD_DIS_5V, 5.3 __IDD_DIS_12V 5.4 __IDD_DIS_14V

VLDO Internal linear regulator output voltage

5V ≤VIN ≤ 14V, fsw ≤ 1MHz

4.75

5

5.2

V

5.65 __V_LDO_100K_5V, 5.66 __V_LDO_100K_12V, 5.67 __V_LDO_100K_14V, 5.69 __V_LDO_200K_5V, 5.70 __V_LDO_200K_12V, 5.71 __V_LDO_200K_14V, 5.73 __V_LDO_500K_5V, 5.74 __V_LDO_500K_12V, 5.75 __V_LDO_500K_14V, 5.77 __V_LDO_1M_5V, 5.78 __V_LDO_1M_12V, 5.79 __V_LDO_1M_14V

5V ≤ VIN ≤ 14V, fsw = 2MHz

4.65

5

5.2

V

5.85 __V_LDO_2M_5V, 5.86 __V_LDO_2M_12V, 5.87 __V_LDO_2M_14V
ENABLE AND UNDERVOLTAGE LOCKOUT

VENR EN threshold rising

0.57

0.6

0.65

V

6.5 __V_EN_RISE_4V, 6.8 __V_EN_RISE_5V, 6.11 __V_EN_RISE_12V, 6.14 __V_EN_RISE_14V

VENF EN threshold falling

0.47

0.5

0.55

V

6.6 __V_EN_FALL_4V, 6.9 __V_EN_FALL_5V, 6.12 __V_EN_FALL_12V, 6.15 __V_EN_FALL_14V

VENH EN hysteresis voltage

85

95

105

mV

6.7 __V_EN_HYS_4V, 6.10 __V_EN_HYS_5V, 6.13 __V_EN_HYS_12V, 6.16 __V_EN_HYS_14V

IEN EN pin input leakage current

VIN = 14V, EN = 5V

5

50

nA

6.1 __I_EN_LEAK_4V, 6.2 __I_EN_LEAK_5V, 6.3 __I_EN_LEAK_12V, 6.4 __I_EN_LEAK_14V

VLDOUVLOR VLDO UVLO rising

3.44

3.55

3.66

V

6.34 __UVLO_VLDO_RISE_1MHz, 6.37 __UVLO_VLDO_RISE_100kHz, 6.40 __UVLO_VLDO_RISE_200kHz, 6.43 __UVLO_VLDO_RISE_500kHz, 6.46 __UVLO_VLDO_RISE_2MHz

VLDOUVLOF VLDO UVLO falling

3.29

3.4

3.51

V

6.35 __UVLO_VLDO_FALL_1MHz, 6.38 __UVLO_VLDO_FALL_100kHz, 6.41 __UVLO_VLDO_FALL_200kHz, 6.44 __UVLO_VLDO_FALL_500kHz, 6.47 __UVLO_VLDO_FALL_2MHz

VLDOUVLOH VLDO UVLO hysteresis

115

135

160

mV

6.36 __UVLO_VLDO_HYS_1MHz, 6.39 __UVLO_VLDO_HYS_100kHz, 6.42 __UVLO_VLDO_HYS_200kHz, 6.45 __UVLO_VLDO_HYS_500kHz, 6.48 __UVLO_VLDO_HYS_2MHz

SOFT START

ISS Soft-start current

SS = 0.3V

1.98

2.7

3.32

μA

7.1 __I_SS_4V, 7.3 __I_SS_5V, 7.5 __I_SS_12V, 7.7 __I_SS_14V

ERROR AMPLIFIER

EAgm Transconductance

–2μA < ICOMP < 2μA, V(COMP) = 1V

1150

1800

2500

μA/V

8.9 __EA_GM_4V, 8.10 __EA_GM_5V, 8.11 __EA_GM_12V, 8.12 __EA_GM_14V

EAISRC Error amplifier source current

V(COMP) = 1V, 100mV input overdrive

100

190

μA

8.13 __EA_I_SOURCE_4V, 8.14 __EA_I_SOURCE_5V, 8.15 __EA_I_SOURCE_12V, 8.16 __EA_I_SOURCE_14V

EAISINK Error amplifier sink current

V(COMP) = 1V, 100mV input overdrive

100

190

μA

8.17 __EA_I_SINK_4V, 8.18 __EA_I_SINK_5V, 8.19 __EA_I_SINK_12V, 8.20 __EA_I_SINK_14V

EAOS Error amplifier offset voltage

–2

2

mV

8.5 __EA_OS_4V, 8.6 __EA_OS_5V, 8.7 __EA_OS_12V, 8.8 __EA_OS_14V

OSCILLATOR

SYNCRT SYNC out low-to-high rise time (10%/90%)

CLOAD = 25pF

6

15

ns

9.1 __T_SYNC_RISE_100kHz_4V, 9.5 __T_SYNC_RISE_200kHz_4V, 9.9 __T_SYNC_RISE_500kHz_4V, 9.13 __T_SYNC_RISE_1MHz_4V, 9.17 __T_SYNC_RISE_1p5MHz_4V, 9.21 __T_SYNC_RISE_2MHz_4V, 9.25 __T_SYNC_RISE_100kHz_5V, 9.29 __T_SYNC_RISE_200kHz_5V, 9.33 __T_SYNC_RISE_500kHz_5V, 9.37 __T_SYNC_RISE_1MHz_5V, 9.41 __T_SYNC_RISE_1p5MHz_5V, 9.45 __T_SYNC_RISE_2MHz_5V, 9.49 __T_SYNC_RISE_100kHz_12V, 9.53 __T_SYNC_RISE_200kHz_12V, 9.57 __T_SYNC_RISE_500kHz_12V, 9.61 __T_SYNC_RISE_1MHz_12V, 9.65 __T_SYNC_RISE_1p5MHz_12V, 9.69 __T_SYNC_RISE_2MHz_12V, 9.73 __T_SYNC_RISE_100kHz_14V, 9.77 __T_SYNC_RISE_200kHz_14V, 9.81 __T_SYNC_RISE_500kHz_14V, 9.85 __T_SYNC_RISE_1MHz_14V, 9.89 __T_SYNC_RISE_1p5MHz_14V, 9.93 __T_SYNC_RISE_2MHz_14V

SYNCFT SYNC out high-to-low fall time (10%/90%)

CLOAD = 25pF

6

17

ns

9.2 __T_SYNC_FALL_100kHz_4V, 9.14 __T_SYNC_FALL_1MHz_4V, 9.22 __T_SYNC_FALL_2MHz_4V, 9.26 __T_SYNC_FALL_100kHz_5V, 9.38 __T_SYNC_FALL_1MHz_5V, 9.46 __T_SYNC_FALL_2MHz_5V, 9.74 __T_SYNC_FALL_100kHz_14V, 9.86 __T_SYNC_FALL_1MHz_14V, 9.94 __T_SYNC_FALL_2MHz_14V

SYNCOL SYNC out low level

IOL= 10mA

500

mV

9.186__SYNC_VOL_4V, 9.187__SYNC_VOL_5V, 9.188__SYNC_VOL_12V, 9.189__SYNC_VOL_14V

EXTDT Externally set frequency detection time

RT = Open, f = 200 kHz

20

μs

9.185__T_SYNC_DETECT

FSWEXT Externally set frequency

RT = 1.07MΩ

95

105

115

kHz

9.4 __FSW_EXT_RT_100kHz_4V, 9.28 __FSW_EXT_RT_100kHz_5V, 9.52 __FSW_EXT_RT_100kHz_12V, 9.76 __FSW_EXT_RT_100kHz_14V

RT = 511kΩ

190

210

230

kHz

9.8 __FSW_EXT_RT_200kHz_4V, 9.32 __FSW_EXT_RT_200kHz_5V, 9.56 __FSW_EXT_RT_200kHz_12V, 9.80 __FSW_EXT_RT_200kHz_14V

RT =90.9kΩ

900

1000

1100

kHz

9.16 __FSW_EXT_RT_1MHz_4V, 9.40 __FSW_EXT_RT_1MHz_5V, 9.64 __FSW_EXT_RT_1MHz_12V, 9.88 __FSW_EXT_RT_1MHz_14V

RT = 34.8kΩ

1700

2000

2300

kHz

9.24 __FSW_EXT_RT_2MHz_4V, 9.48 __FSW_EXT_RT_2MHz_5V, 9.72 __FSW_EXT_RT_2MHz_12V, 9.96 __FSW_EXT_RT_2MHz_14V

VOLTAGE REFERENCE

VREF Internal voltage reference initial tolerance

Measured at COMP, 25°C

0.609

0.613

0.615

V

8.1 __VREF_4V, 8.2 __VREF_5V, 8.3 __VREF_12V, 8.4 __VREF_14V

REFCAP REFCAP voltage

REFCAP = 470nF

1.213

1.225

1.237

V

5.88 __V_REFCAP_100K_4V, 5.89 __V_REFCAP_100K_5V, 5.90 __V_REFCAP_100K_12V, 5.91 __V_REFCAP_100K_14V, 5.92 __V_REFCAP_200K_4V, 5.93 __V_REFCAP_200K_5V, 5.94 __V_REFCAP_200K_12V, 5.95 __V_REFCAP_200K_14V, 5.96 __V_REFCAP_500K_4V, 5.97 __V_REFCAP_500K_5V, 5.98 __V_REFCAP_500K_12V, 5.99 __V_REFCAP_500K_14V, 5.100__V_REFCAP_1M_4V, 5.101__V_REFCAP_1M_5V, 5.102__V_REFCAP_1M_12V, 5.103__V_REFCAP_1M_14V, 5.104__V_REFCAP_1P5M_4V, 5.105__V_REFCAP_1P5M_5V, 5.106__V_REFCAP_1P5M_12V, 5.107__V_REFCAP_1P5M_14V, 5.108__V_REFCAP_2M_4V, 5.109__V_REFCAP_2M_5V, 5.110__V_REFCAP_2M_12V, 5.111__V_REFCAP_2M_14V

CURRENT SENSE, CURRENT LIMIT, AND HICCUP

CCSR

COMP to CS_ILIM ratio

2.00

2.06

2.12

10.49 __CCSR_Ratio

VCS_ILIM Current limit (over-current) threshold

1.05

1.09

V

10.1 __V_CS_ILIM_OC_Rise_4V, 10.3 __V_CS_ILIM_OC_Rise_5V, 10.5 __V_CS_ILIM_OC_Rise_12V, 10.7 __V_CS_ILIM_OC_Rise_14V

FAULT

VFLTR FLT threshold rising

0.57

0.6

0.65

V

12.1 __V_FAULT_RISE_4V, 12.4 __V_FAULT_RISE_5V, 12.7 __V_FAULT_RISE_12V, 12.10 __V_FAULT_RISE_14V

VFLTF FLT threshold falling

0.47

0.5

0.55

V

12.2 __V_FAULT_FALL_4V, 12.5 __V_FAULT_FALL_5V, 12.8 __V_FAULT_FALL_12V, 12.11 __V_FAULT_FALL_14V

VFLTH FLT hysteresis voltage

90

100

110

mV

12.3 __V_FAULT_HYS_4V, 12.6 __V_FAULT_HYS_5V, 12.9 __V_FAULT_HYS_12V, 12.12 __V_FAULT_HYS_14V

TFLT FLT minimum pulse width

VFLT = 1V

0.4

1.4

μs

12.14 __T_FAULT_MIN

tDFLT FLT delay duration

fsw = 100kHz

140

152

169

μs

12.15 __T_FAULT_DELAY_100kHz

fsw = 200kHz

66

78

86

μs12.17 __T_FAULT_DELAY_200kHz
fsw = 1MHz

14

17

21

μs12.21 __T_FAULT_DELAY_1MHz
fsw = 2MHz

7

11

14

μs12.23 __T_FAULT_DELAY_2MHz
PRIMARY AND SYNCHRONOUS RECTIFIER OUTPUTS

Rise/fall time

RLOAD = 50kΩ, CLOAD = 100pF, 10% to 90%

10

17

ns

13.1 __OUTA_RISE_1MHz_4V, 13.9 __OUTA_RISE_1MHz_5V, 13.17 __OUTA_RISE_1MHz_12V, 13.25 __OUTA_RISE_1MHz_14V, 13.3 __OUTA_FALL_1MHz_4V, 13.11 __OUTA_FALL_1MHz_5V, 13.19 __OUTA_FALL_1MHz_12V, 13.27 __OUTA_FALL_1MHz_14V, 13.2 __OUTB_RISE_1MHz_4V, 13.10 __OUTB_RISE_1MHz_5V, 13.18 __OUTB_RISE_1MHz_12V, 13.26 __OUTB_RISE_1MHz_14V, 13.4 __OUTB_FALL_1MHz_4V, 13.12 __OUTB_FALL_1MHz_5V, 13.20 __OUTB_FALL_1MHz_12V, 13.28 __OUTB_FALL_1MHz_14V

tMIN Minimum on-time LEB = 10kΩ

LEB = 10kΩ, 5V ≤ VIN ≤ 14V

85

ns

13.145__OUT_T_ON_MIN

DUTY CYCLE

DMAX Maximum duty cycle

DCL = AVSS

45

48

50

%

13.160__MAX_DC_DCL_AVSS