米6体育平台手机版

SLVSDK7C April 2017 – February 2020

PRODUCTION DATA.

Unless otherwise noted, V_IN = 0.65 V to 3.6 V

PARAMETER		TEST CONDITIONS		T_A	TYP	MAX	UNIT
I_Q	Quiescent current	V_OUT = Open, Switch enabled	V_IN > 1.2 V	–40°C to +85°C	30	65	µA
			V_IN > 1.2 V	–40°C to +105°C		75
			V_IN ≤ 1.2 V	–40°C to +85°C	20	50
			V_IN ≤ 1.2 V	–40°C to +105°C		55
I_SD	Shutdown current	V_OUT = GND, Switch disabled	V_IN > 1.8 V	–40°C to +85°C	1	7.5	µA
			V_IN > 1.8 V	–40°C to +105°C		18
			V_IN ≤ 1.8 V	–40°C to +85°C	0.9	5.5
			V_IN ≤ 1.8 V	–40°C to +105°C		9.5
R_ON	ON-resistance	I_OUT = –200 mA	V_IN ≥ 1.8 V	25°C	6.7	10	mΩ
				–40°C to +85°C		12
				–40°C to +105°C		12
			V_IN = 1.2 V	25°C	6.9	10
				–40°C to +85°C		12
				–40°C to +105°C		13
			V_IN = 1.05 V	25°C	7.2	10.5
				–40°C to +85°C		13
				–40°C to +105°C		14
			V_IN = 0.65 V	25°C	8.9	14
				–40°C to +85°C		18
				–40°C to +105°C		19
R_PD	Output pull down resistance⁽¹⁾	I_OUT = 3 mA, Switch disabled	V_IN = 3.6 V	–40°C to +105°C	150		Ω
R_PD	Output pull down resistance⁽¹⁾	I_OUT = 3 mA, Switch disabled	V_IN = 0.65 V	–40°C to +105°C	710		Ω
I_ON	ON input leakage current	V_ON =0 V to 3.6 V		–40°C to +105°C		0.1	µA
I_PG,LK	Leakage current into PG pin	V_PG = 0 V to 3.6 V	V_ON ≤ V_IL	–40°C to +105°C	0.1	8.5	µA
V_PG,OL	PG output low voltage	V_PG = 0 V to 3.6 V	V_ON ≥ V_IH, I_PG = 1 mA	–40°C to +105°C		0.2	V
T_SD	Thermal shutdown	T_J rising			170		°C
T_{SD, HYS}	Thermal shutdown hysteresis	T_J falling			30		°C

(1) See the Quick Output Discharge (QOD) section.