SLVU157A March 2006 – October 2021 TPS5430 , TPS5431
A summary of the TPS5430EVM-173 performance specifications is provided in Table 1-2. Specifications are given for an input voltage of VIN = 15 V and an output voltage of 5 V, unless otherwise specified. The TPS5430EVM-173 is designed and tested for VIN = 10 V to 35 V. The ambient temperature is 25°C for all measurements, unless otherwise noted.
SPECIFICATION | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
VIN voltage range | TPS5430EVM-173 | 10 | 15 | 35 | V | ||
TPS5431EVM-173 | 9 | 15 | 21 | ||||
Output voltage set point | 5.0 | V | |||||
Output current range | VIN = 3.3 V | 0 | 3 | A | |||
Line regulation | TPS5430EVM-173 | IO = 0 A – 3 A, VIN = 10 V – 35 V | ±0.07% | ||||
TPS5431EVM-173 | IO = 0 A – 3 A, VIN = 9 V – 21 V | ±0.04% | |||||
Load regulation | TPS5430EVM-173 | VIN = 15 V, IO = 0 A to 3 A | ±0.03% | ||||
TPS5431EVM-173 | ±0.05% | ||||||
Load transient response | TPS5430EVM-173 | IO = 0.75 A to 2.25 A | Voltage change | –50 | mV | ||
Recovery time | 150 | μs | |||||
TPS5431EVM-173 | Voltage change | –40 | mV | ||||
Recovery time | 150 | μs | |||||
TPS5430EVM-173 | IO = 2.25 A to 0.75 A | Voltage change | 50 | mV | |||
Recovery time | 150 | μs | |||||
TPS5431EVM-173 | Voltage change | 40 | mV | ||||
Recovery time | 150 | μs | |||||
Loop bandwidth | TPS5430EVM-173 | VIN = 25 V, IO = 1 A | 25.0 | kHz | |||
TPS5431EVM-173 | VIN = 15 V, IO = 1 A | 23.9 | |||||
Phase margin | TPS5430EVM-173 | VIN = 25 V , IO = 1 A | 50° | ||||
TPS5431EVM-173 | VIN = 15 V, IO = 1 A | 51° | |||||
Input ripple voltage | TPS5430EVM-173 | IO = 3 A | 255 | 300 | mVpp | ||
TPS5431EVM-173 | 295 | 350 | |||||
Output ripple voltage | TPS5430EVM-173 | IO = 3 A | 20 | mVpp | |||
TPS5431EVM-173 | 20 | ||||||
Output rise time | 8 | ms | |||||
Operating frequency | 500 | kHz | |||||
Max efficiency | TPS5430EVM-173 | VIN = 10 V, VO = 5 V, IO = 0.75 A | 93.6% | ||||
TPS5431EVM-173 | VIN = 9 V, VO = 5 V, IO = 0.75 A | 94.0% |