米6体育平台手机版

SLVU264A November 2008 – October 2021 TPS54233

4.2 Bill of Materials

Table 4-1 presents the bill of materials for the TPS54233EVM-373.

Table 4-1 TPS54233EVM-373 Bill of Materials

Count	RefDes	Value	Description	Size	Part Number	MFR
0	C1	Open	Capacitor, Ceramic	1206
1	C2	10 μF	Capacitor, Ceramic, 25V, X5R, 10%	1206	GRM31CR61E106KA12	muRata
0	C3	Open	Capacitor, Ceramic	0603
1	C4	0.1 μF	Capacitor, Ceramic, 16V, X7R, 10%	0603	Std	Std
1	C5	0.015 μF	Capacitor, Ceramic, 16V, X7R, 10%	0603	Std	Std
2	C6, C7	220 pF	Capacitor, Ceramic, 16V, X7R, 10%	0603	Std	Std
1	C8	470 μF	Capacitor, Aluminum, 10V, ±20%	0.328 x 0.328 inch	EEVFK1A471P	Panasonic
1	D1	B230A	Diode, Schottky, 2A, 40V	SMA	B240A	Diodes Inc
2	J1, J4	ED1514	Terminal Block, 2-pin, 6-A, 3,5mm	0.27 × 0.25 inch	ED1514	OST
2	J2, J3	PTC36SAAN	Header, 2-pin, 100mil spacing, (36-pin strip)	0.100 × 2	PTC36SAAN
1	L1	15 μH	Inductor, SMT, 3.7A, 41 mΩ	0.402 × 0.394 inch	MSS1038-273NL	Coilcraft
1	R1	332k	Resistor, Chip, 1/16W, 1%	0603	Std	Std
1	R2	68.1k	Resistor, Chip, 1/16W, 1%	0603	Std	Std
1	R3	30.9k	Resistor, Chip, 1/16W, 1%	0603	Std	Std
1	R4	0	Resistor, Chip, 1/16W, 1%	0603	Std	Std
1	R5	10.2k	Resistor, Chip, 1/16W, 1%	0603	Std	Std
1	R6	3.24k	Resistor, Chip, 1/16W, 1%	0603	Std	Std
0	R7	Open	Resistor, Chip, 1/16W, 1%	0603	Std	Std
3	TP1, TP3, TP5	5000	Test Point, Red, Thru Hole Color Keyed	0.100 × 0.100 inch	5000	Keystone
3	TP2, TP4, TP6	5001	Test Point, Black, Thru Hole Color Keyed	0.100 × 0.100 inch	5001	Keystone
1	U1	TPS54233D	IC, DC-DC Converter, 28V, 2A	SO-8	TPS54233D	TI
1	—		PCB	2.0" x 2.0" x 0.062"	HPA373	Any
1	—		Shunt, 100-mil, Black	0.100	929950-00	3M

Note:

These assemblies are ESD sensitive, ESD precautions shall be observed
These assemblies must be clean and free from flux and all contaminants. Use of unclean flux is not acceptable.
These assemblies must comply with workmanship standards IPC-A-610 Class 2.
Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.