SLVU570A September 2011 – May 2021 TPS652510
| Header Number | Function | LOC | Placement | Comment |
|---|---|---|---|---|
| JP11 | BUCK1 enable (EN1) | SW | For immediate start-up fit jumper to V3V For sequencing do not fit jumper To disable converter fit jumper to GND | Fit according to test requirement |
| JP20 | BUCK2 enable (EN2) | SW | For immediate start-up fit jumper to V3V For sequencing do not fit jumper To disable converter fit jumper to GND | Fit according to test requirement |
| JP3 | BUCK3 enable (EN3) | SW | For immediate start-up fit jumper to V3V For sequencing do not fit jumper To disable converter fit jumper to GND | Fit according to test requirement |
| JP25 | Forced PWM (F_PWM) | S | For forced PWM operation fit jumper to V3V For automatic PFM/PWM operation fit jumper to GND | Do not leave this header open. Use a jumper to set either forced PWM mode or automatic PFM/PWM mode |
| JP26 | Test | S | Used for test purposes | Jumper must be fitted |
| JP27 | PGOOD | S | PGOOD indicated pulled to 3V3 | Fit according to test requirement |