SLVUBR5D August 2019 – November 2021 TPSM82821 , TPSM82822 , TPSM82823
J1, Pin 1 and 2 – VIN | Positive input connection from the input supply for the EVM. |
J1, Pin 3 and 4 – S+/S– | Input voltage sense connections. Measure the input voltage at this point. |
J1, Pin 5 and 6 – GND | Input return connection from the input supply for the EVM. |
J2, Pin 1 and 2 – VOUT | Output voltage connection |
J2, Pin 3 and 4 – S+/S– | Output voltage sense connections. Measure the output voltage at this point. |
J2, Pin 5 and 6 – GND | Output return connection |
J3 – PG/GND | The PG output appears on pin 1 of this header with ground on pin 2. |
JP1 – EN | EN pin input jumper. Place the supplied jumper across ON and EN to turn on the module. Place the jumper across OFF and EN to turn off the IC. |