米6体育平台手机版

SLVUBR5D August 2019 – November 2021 TPSM82821 , TPSM82822 , TPSM82823

1TPSM8282xEVM-080 and TPSM8282xAEVM-127 Evaluation Modules
2Introduction
1. 2.1 Performance Specification
2. 2.2 Modifications
  1. 2.2.1 Input and Output Capacitors
3Setup
1. 3.1 Setup
2. 3.2 Input/Output Connector Descriptions
4Safety Instructions
5TPSM8282xEVM-080 Test Results
6Board Layout
7Schematic and Bill of Materials
1. 7.1 Schematic
2. 7.2 Bill of Materials
  1. A Appendix - Rev.A EVM
    1. A.1 Rev.A - Input and Output Capacitors
    2. A.2 Rev.A - Setup
      1. A.2.1 Rev.A - Setup
      2. A.2.2 Rev.A - Input/Output Connector Descriptions
    3. A.3 Rev.A - Board Layout
    4. A.4 Rev.A - Schematic and Bill of Materials
      1. A.4.1 Rev.A - Schematic
      2. A.4.2 Rev.A - Bill of Materials
        
        B Revision History

3.1 Setup

To operate the EVM, set jumper JP1 between ON and EN to turn on the device as shown in Section 3.2. Connect the input supply to J1 and connect the load to J2.