米6体育平台手机版

SLVUBW6A May 2020 – December 2020 TPS61288

Trademarks
1Introduction
1. 1.1 Performance Specification
2. 1.2 Modification
2Connector, Test Point and Jumper Descriptions
1. 2.1 Connector and Test Point Descriptions
2. 2.2 Jumper Configuration
  1. JP1 (VIN Control)
  2. 2.2.1 JP2 (Enable)
3Schematic, Bill of Materials, and Board Layout
4Revision History

JP1 (VIN Control)

The JP1 jumper connects the control VIN with power VIN. By default, this jumper is set to the ON position. Take off the jumper for a user-defined voltage.