SLVUBY7A October   2020  – October 2022 DRA821U , DRA821U-Q1 , LP8764-Q1 , TPS6594-Q1

1.   User's Guide for Powering DRA821 with TPS6594-Q1 and LP8764-Q1
2.   Trademarks
3. 1Introduction
4. 2Device Versions
5. 3Processor Connections
6. 4Supporting Functional Safety Systems
   1. 4.1 Achieving ASIL-B System Requirements
   2. 4.2 Achieving up to ASIL-D System Requirements
7. 5Static NVM Settings
   1. 5.1  Application-Based Configuration Settings
   2. 5.2  Device Identification Settings
   3. 5.3  BUCK Settings
   4. 5.4  LDO Settings
   5. 5.5  VCCA Settings
   6. 5.6  GPIO Settings
   7. 5.7  Finite State Machine (FSM) Settings
   8. 5.8  Interrupt Settings
   9. 5.9  POWERGOOD Settings
   10. 5.10 Miscellaneous Settings
   11. 5.11 Interface Settings
   12. 5.12 Multi-Device Settings
   13. 5.13 Watchdog Settings
8. 6Pre-Configurable Finite State Machine (PFSM) Settings
   1. 6.1 Configured States
   2. 6.2 PFSM Triggers
   3. 6.3 Power Sequences
      1. 6.3.1 TO_SAFE_SEVERE
      2. 6.3.2 TO_SAFE_ORDERLY and TO_STANDBY
      3. 6.3.3 ACTIVE_TO_WARM
      4. 6.3.4 ESM_SOC_ERROR
      5. 6.3.5 PWR_SOC_ERROR
      6. 6.3.6 MCU_TO_WARM
      7. 6.3.7 TO_MCU
      8. 6.3.8 TO_ACTIVE
      9. 6.3.9 TO_RETENTION
9. 7Application Examples
   1. 7.1 Moving Between States: ACTIVE, MCU, and RETENTION
      1. 7.1.1 ACTIVE
      2. 7.1.2 MCU ONLY
      3. 7.1.3 RETENTION
   2. 7.2 Entering and Exiting Standby
   3. 7.3 Entering and Existing LP_STANDBY
   4. 7.4 GPIO8 and Watchdog
10. 8Additional Resources
11. 9Revision History