SLVUBZ2A September 2020 – December 2020 LM5127-Q1
Table 7-2 shows the possible CFG/MODE pin settings to configure channel 1 as a buck . If a dual phase buck configuration for channel 2 and channel 3 is required see Section 7.2 for details on the proper configuration. For proper test setup see Section 7.3
PIN | Pin Connection | CH1 | CH2 | CH3 | Switching Mode |
---|---|---|---|---|---|
2 (9.53kΩ) | 3 to 4 | Buck | Single Phase Buck | Single Phase Buck | Skip |
4 (29.4kΩ) | 7 to 8 | Buck | FPWM/DEM | ||
6 (54.9kΩ) | 11 to 12 | Buck | Dual Phase Buck | Skip | |
8 (90.9kΩ) | 15 to 16 | Buck | FPWM/DEM |