Figure 2-2 and Figure 2-3 are the top overlay and bottom overlay of the printed circuit board (PCB) and shows the component placement on the EVM. Figure 2-4 shows the top layout, Figure 2-5 and Figure 2-6 show the top and bottom layers, and Figure 2-7 and Figure 2-8 show the top and bottom solder masks of the EVM.

Figure 2-2 Component Placement - Top Overlay

Figure 2-4 Layout - Top

Figure 2-6 Bottom Layer

Figure 2-8 Bottom Solder Mask

Figure 2-3 Component Placement - Bottom Overlay

Figure 2-5 Top Layer

Figure 2-7 Top Solder Mask