SLVUCG1 December   2022

 

  1.   Abstract
  2.   Trademarks
  3. 1Introduction
    1. 1.1 Before You Begin
  4. 2Schematic
  5. 3EVM Setup
    1. 3.1 Jumper Connections
      1. 3.1.1 J1
      2. 3.1.2 J2
      3. 3.1.3 J3
      4. 3.1.4 J4
      5. 3.1.5 J5
      6. 3.1.6 J6
      7. 3.1.7 J7
      8. 3.1.8 J8
      9. 3.1.9 J9
    2. 3.2 Test Points
    3. 3.3 Soldering Guidelines
  6. 4Equipment Connection and Operation
  7. 5PCB Layout
  8. 6Bill of Materials (BOM)

Bill of Materials (BOM)

Table 6-1 shows the BOM for this EVM.

Table 6-1 UA78LEVM-075 BOM
DesignatorQuantityValueDescriptionPackage ReferencePart NumberManufacturerAlternate Part NumberAlternate Manufacturer
!PCB1 1 Printed Circuit Board LP075 Any
C3 1 0.33uF CAP, CERM, 0.33 uF, 50 V, +/- 10%, X7R, AEC-Q200 Grade 1, 0603 0603 CGA3E3X7R1H334K080AB TDK
C4 1 0.1uF CAP, CERM, 0.1 uF, 50 V, +/- 10%, X7R, AEC-Q200 Grade 1, 0603 0603 CGA3E2X7R1H104K080AA TDK
J1, J2 2 Standard Banana Jack, insulated, 10A, red 571-0500 571-0500 DEM Manufacturing
J3, J4 2 Terminal Block, 5 mm, 2x1, Tin, TH Terminal Block, 5 mm, 2x1, TH 691 101 710 002 Wurth Elektronik
J7, J8 2 Standard Banana Jack, insulated, 10A, black 571-0100 571-0100 DEM Manufacturing
LBL1 1 Thermal Transfer Printable Labels, 0.650" W x 0.200" H - 10,000 per roll PCB Label 0.650 x 0.200 inch THT-14-423-10 Brady
TP1, TP2, TP3, TP4 4 Test Point, Compact, SMT Testpoint_Keystone_Compact 5016 Keystone Electronics
U1 1 3 Pin 100mA Fixed 5V Positive Voltage Regulator, PK0003A (SOT-3) PK0003A UA78L05CPK Texas Instruments Texas Instruments
C1, C6 0 10uF CAP, CERM, 10 uF, 63 V, +/- 10%, X7R, 1210 1210 GRM32ER71J106KA12L MuRata
C2, C5 0 1uF CAP, CERM, 1 µF, 50 V,+/- 10%, X7R, AEC-Q200 Grade 1, 0805 0805 08055C105K4Z2A AVX
FID1, FID2, FID3 0 Fiducial mark. There is nothing to buy or mount. N/A N/A N/A
J5, J6 0 SMA, 50 Ohm, Gold, TH SMA, TH 32K101-400L5 Rosenberger
J9 0 Header, 2.54mm, 3x1, Tin, TH Header, 2.54mm, 3x1, Tin, TH 22284030 Molex