3 Use Cases

General use cases for the LP875x-Q1 devices are listed in Table 1. The total output capacitance is the sum of the C_LOCAL capacitance near the switcher and C_POL point of load (POL) capacitance. The maximum total output capacitance per phase is 500 µF, if the output voltage slew-rate is less than or equal to 1.9 mV/µs. Higher slew-rates have lower maximum capacitance limits. Refer to LP8756x-Q1 16-A Buck Converter With Integrated Switches or LP8752x-Q1 10-A Buck Converter With Integrated Switches datasheet for more information.

In addition to the 21 use cases listed in Table 1, the phase configuration has an effect on stability. Every use case is measured and simulated for every phase configuration from 1 to 4 phases, totaling 84 measurements and simulations.