Figure 4-2 shows the REF34-Q1 pin diagram for the DBV-5 package. For a detailed description of
the device pins please refer to the Pin Configuration and Functions section
in the REF34-Q1 data sheet.
Table 4-6 Pin FMA for Device Pins
Short-Circuited to Ground| Pin Name | Pin No. | Description of Potential Failure Effect(s) | Failure Effect Class |
|---|
| NC |
1 |
No effect |
D |
| GND |
2 |
No effect |
D |
| IN |
3 |
No output voltage, high leakage |
B |
| OUT |
4 |
No output voltage |
B |
| NC |
5 |
No effect |
D |
Table 4-7 Pin FMA for Device Pins
Open-Circuited| Pin Name | Pin No. | Description of Potential Failure Effect(s) | Failure Effect Class |
|---|
| NC |
1 |
No effect |
D |
| GND |
2 |
No output voltage |
D |
| IN |
3 |
Output is not regulated |
C |
| OUT |
4 |
Output is not regulated |
C |
| NC |
5 |
No effect |
D |
Table 4-8 Pin FMA for Device Pins
Short-Circuited to Adjacent Pin| Pin Name | Pin No. | Shorted to | Description of Potential Failure Effect(s) | Failure Effect Class |
|---|
| NC |
1 |
GND |
No effect |
D |
| GND |
2 |
IN |
Disables device, no output, high
leakage |
B |
| IN |
3 |
OUT |
Output not regulated, high
leakage |
B |
| OUT |
4 |
NC |
No effect |
D |
| NC |
5 |
NC |
No effect |
D |
Table 4-9 Pin FMA for Device Pins Short-Circuited to
Supply| Pin Name | Pin No. | Description of Potential Failure Effect(s) | Failure Effect Class |
|---|
| NC |
1 |
No effect |
D |
| GND |
2 |
No output voltage, high leakage |
B |
| IN |
3 |
No effect |
D |
| OUT |
4 |
Output is not regulated |
C |
| NC |
5 |
No effect |
D |
Figure 4-2 Pin Diagram (DBV-5 Package)