米6体育平台手机版

SNVA966 July 2020 – MONTH LP8864-Q1 , LP8864S-Q1 , LP8866-Q1 , LP8866S-Q1

Trademarks
1Fault Handling Routine
2Different Fault and Diagnostic Handling Method Recommendation
1. 2.1 Different Fault Handling Method
2. 2.2 Different Diagnostic Wrong Information Handling Method
  1. 2.2.1 System-Level Critical Wrong Diagnostic Information
  2. 2.2.2 System Level Sustainable Wrong Diagnostic Information
3Summary
A Fault-Related Functions
1. A.1 Protection and Fault Detections
  1. A.1.1 Supply Faults
    1. A.1.1.1 VIN Undervoltage Faults (VINUVLO)
    2. 16
    3. A.1.1.2 VIN Overvoltage Faults (VINOVP)
    4. A.1.1.3 VDD Undervoltage Faults (VDDUVLO)
    5. A.1.1.4 VIN OCP Faults (VINOCP)
    6. A.1.1.5 Charge Pump Faults (CPCAP, CP)
    7. A.1.1.6 Boost Sync Clock Invalid Faults (BSTSYNC)
    8. A.1.1.7 CRC Error Faults (CRCERR)
  2. A.1.2 Boost Faults
  3. A.1.3 LED Faults
    1. A.1.3.1 Open LED Faults (OPEN_LED)
    2. A.1.3.2 Short LED Faults (SHORT_LED)
    3. A.1.3.3 LED Short to GND Faults (GND_LED)
    4. A.1.3.4 Invalid LED String Faults (INVSTRING)
    5. A.1.3.5 I2C Timeout Faults
  4. A.1.4 Overview of the Fault and Protection Schemes
2. A.2 Programming Examples
  1. A.2.1 Clearing Fault Interrupts
  2. A.2.2 Disabling Fault Interrupts
  3. A.2.3 Diagnostic Registers

A.1.3.4 Invalid LED String Faults (INVSTRING)

During device initialization, any of un-used LED outputs pins are checked whether connected to GND or not. If they are not connected to GND as expected, the LP886XX-Q1 reports invalid string fault and tries to function normally if possible. The INVSTRING_STATUS fault bit is set in the LED_FAULT_STATUS register, and the INT pin is triggered. The LEDSET resistor missing or invalid fault is not detected after initialization, so that the LP886XX-Q1 operates in the configuration determined during initialization even though the LEDSET resistor is missing or invalid after initialization.