SNVA966 July 2020 – MONTH LP8864-Q1 , LP8864S-Q1 , LP8866-Q1 , LP8866S-Q1
The LEDSET resistor missing or invalid is detected if the resistor is not assembled or not valid value as requested during the initialization. The LP886XX-Q1 device defaults to 4 (LP8864-Q1 & LP8864S-Q1)/ 6(LP8866-Q1 & LP8866S-Q1)-channel/150 (in LP8864S-Q1 & LP8866S-Q1)/ 200 (in LP8864-Q1 & LP8866-Q1)-mA configuration if the LEDSET resistor is missing or invalid. The LEDSET_STATUS fault bit is set in the BOOST_FAULT_STATUS register. The LEDSET resistor missing or invalid fault will not be monitored after initialization, so that the LP886XX-Q1 is operating in the configuration determined during initialization even though the LEDSET resistor is missing or invalid after initialization.