SNVU792 September   2021 LM5152-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Applications
    2. 1.2 Features
  3. 2EVM Setup
    1. 2.1 EVM Characteristics
    2. 2.2 EVM Connectors and Test Points
  4. 3Test Setup and Procedures
    1. 3.1 Equipment
  5. 4Test Results
    1. 4.1 Efficiency
    2. 4.2 Loop Response
    3. 4.3 Thermal Performance
    4. 4.4 Typical Waveforms
  6. 5PCB Layers
  7. 6Schematic
  8. 7Bill of Materials

Test Setup and Procedures

Figure 3-1 shows the required test setup to recreate the results found in Section 4.

GUID-20210816-SS0I-WRKL-Q4LF-BJNMQ49TL5KX-low.gif Figure 3-1 EVM Test Setup