SNVU819 November 2021 LM5168 , LM5168-Q1

2 EVM Characteristics

Unless otherwise specified, the following conditions apply: T_A = 25ºC, I_OUT1 = primary output current, I_OUT2 = secondary output current

Table 2-1 LM5168FQEVM Electrical Performance Characteristics

Parameter	Test Conditions		MIN	TYP	MAX	UNITS
INPUT CHARACTERISTICS
Input voltage range, V_VIN	EVM input voltage operating range		20	48	115	V
Input voltage turn-on, V_IN(ON)	Adjusted by EN/UVLO resistors			6.0		V
Input voltage turn-off, V_IN(OFF)				5.6		V
Input voltage hysteresis, V_IN(HYS)				0.4		V
Input current, no load, I_IN(NL)	I_OUT = 0 A	V_IN = 48 V		13		mA
Input current, disabled, I_IN(OFF)	V_EN/UVLO = 0 V, no EN divider	V_IN = 36 V		10		µA
OUTPUT CHARACTERISTICS
Output voltage, V_OUT1	V_IN = 48 V, I_OUT1 = I_OUT2 = 0A			10.0		V
Output voltage, V_OUT2	V_IN = 48 V, I_OUT1=0 A, I_OUT2 = 0A			10.0		V
Output current, I_OUT1	V_IN = 48 V, I_OUT2 = 0 A			0.25		A
Output current, I_OUT2	V_IN = 48 V, I_OUT1 = 0 A			0.25		A
Output voltage regulation, ΔV_OUT1	Load regulation, V_IN = 48 V	I_OUT1 = 0 A to 0.25 A, I_OUT2 = 0 A		1		mV
Output voltage regulation, ΔV_OUT2	Load regulation, V_IN = 48 V	I_OUT1 = 0 A to 0.25 A, I_OUT2 = 0 A		200
Output voltage regulation, ΔV_OUT1	Load regulation, V_IN = 48 V	I_OUT2 = 0 A to 0.25 A, I_OUT1 = 0 A		7
Output voltage regulation, ΔV_OUT2	Load regulation, V_IN = 48 V	I_OUT2 = 0 A to 0.25 A, I_OUT1 = 0 A		1000
Output voltage regulation, ΔV_OUT1	Line regulation, I_OUT1 = I_OUT2 = 0 A	V_IN = 24 V to 115 V		50
Output voltage regulation, ΔV_OUT2	Line regulation, I_OUT1 = I_OUT2 = 0 A	V_IN = 24 V to 115 V		750
Maximum output current from primary output	V_IN = 48 V, I_OUT2 = 0 A			0.27		A
Soft-start time, t_SS				3.5		ms
SYSTEM CHARACTERISTICS
Switching frequency	V_IN = 36 V, I_OUT1 = 0 A , I_OUT2 = 0 A			730		kHz
Half-load efficiency	I_OUT1 = I_OUT2 = 0.08 A	V_IN = 48 V		70%
Full load efficiency	I_OUT1 = I_OUT2 = 0.125 A	V_IN = 48 V		76%
Full load efficiency	I_OUT1 = I_OUT2 = 0.125 A	V_IN = 60 V		72%