SPMA078 March 2021 TM4C1290NCPDT , TM4C1290NCPDT , TM4C1290NCZAD , TM4C1290NCZAD , TM4C1292NCPDT , TM4C1292NCPDT , TM4C1292NCZAD , TM4C1292NCZAD , TM4C1294KCPDT , TM4C1294KCPDT , TM4C1294NCPDT , TM4C1294NCPDT , TM4C1294NCZAD , TM4C1294NCZAD , TM4C1297NCZAD , TM4C1297NCZAD , TM4C1299KCZAD , TM4C1299KCZAD , TM4C1299NCZAD , TM4C1299NCZAD , TM4C129CNCPDT , TM4C129CNCPDT , TM4C129CNCZAD , TM4C129CNCZAD , TM4C129DNCPDT , TM4C129DNCPDT , TM4C129DNCZAD , TM4C129DNCZAD , TM4C129EKCPDT , TM4C129EKCPDT , TM4C129ENCPDT , TM4C129ENCPDT , TM4C129ENCZAD , TM4C129ENCZAD , TM4C129LNCZAD , TM4C129LNCZAD , TM4C129XKCZAD , TM4C129XKCZAD , TM4C129XNCZAD , TM4C129XNCZAD
- Trademarks
- 1Introduction
- 2Theory of Operation
- 3Software Description
- 4Execution Time
-
5Examples
- 5.1 Polling Fee Example
- 5.2 Interrupt Fee Example
- 5.3
Import, Program and Run Examples
- 5.3.1 To Import the Project into CCS, First Select "File" → "Import"
- 5.3.2 Select "CCS Projects" to Import the Example, Then Click "Next"
- 5.3.3 Provide the Path to Either the Unzipped Project by Selecting the First Radio Button or Import the Sip File Directly by Selecting the Second Radio Button. Click the "Copy Projects Into Workspace".
- 5.3.4 After the Project Path is Provided, it Will Show up as a Discovered Project. Click the "Finish" Button to Complete the Import.
- 5.3.5 Program the Example into the Flash Memory and Start Executing the Example
- 5.3.6 Configure the Serial Terminal Window
- 5.3.7 Run the Example
- 6Summary
4.2.3 Write Time when Sector Copy is Required and Copy Sector is Full
When a sector copy operation is required and the copy sector is already full, the copy sector must first be erased before the copy operation can start. This is shown in Figure 4-3 below. On this part, erasing the copy sector added an additional 20 ms to the write time of the dataset.
Figure 4-3 Program Time with Sector Erase and Copy Sector Erase.