In applications requiring this functionality, not all initialized compiler sections may need to be copied to RAM or have enough RAM to copy all the sections. The application code itself may only need to be copied. In this case, only the .text section would be copied to the RAM. For this, all of the copy routines for the other sections can be removed from the DSP28xxx_SectionCopy_nonBIOS.asm file and the linker command file can be changed to load and run the other sections from Flash. This will save Flash space and cut down on the execution time required before main( ) is entered.
Determine that the application can handle the small lag in execution time to copy the sections. If the application cannot handle this time, the procedure shown in Running an Application from Internal Flash Memory on the TMS320F28xx DSP (SPRA958) should be used to copy just certain portions of the code to RAM.
If using DSP/BIOS, the methodologies from Running an Application from Internal Flash Memory on the TMS320F28xx DSP (SPRA958) for copying certain portions of code to RAM is suggested. A project that uses DSP/BIOS is generally a larger application and this solution is not recommended.