SPRUIT0A December 2019 – May 2020
-
Jacinto7 EVM Infotainment Expansion
- Trademarks
- 1 Introduction
- 2 Infotainment Expansion Board Overview
- 3 Infotainment Expansion Board - User Setup/Configuration
- 4
Infotainment Expansion Board Hardware Architecture
- 4.1 Infotainment Expansion Board Hardware Top Level Diagram
- 4.2 Expansion Connectors
- 4.3 Board ID EEPROM
- 4.4 Audio Codec Interface
- 4.5 FPD link De-Serializer Interface (Audio)
- 4.6 DIR Interface
- 4.7 DIT Interface
- 4.8 Legacy Audio/JAMR3 Connectors
- 4.9 VIN/VOUT Mux Selection
- 4.10 HDMI Interface Bridge
- 4.11 FPD Link Display Serializer Interface
- 4.12 Parallel Camera Interface
- A Jacinto7 EVM Interface/IO Mapping
- Revision History
3.1 Interfacing Infotainment Expansion Board With CP Board
Infotainment expansion boards interface with Jacinto7 EVM Common Processor Board (CPB). Expansion connectors J1 and J2 on the Infotainment will be mated to the EVM CPB Expansion connectors J46 and J51.
Figure 4. Expansion Connectors on INFO Exp Board Top Side 
Figure 5. Expansion Connectors on Jacinto7 CP Board Bottom Side