The controlCARD can be completely
powered and operated from the USB-C connector. In this stand-alone mode, the
on-board isolated power supply provides power to the F2800137 device; no additional
hardware is required. Optionally, an external 5 V supply can be provided to power
the F2800137 device. For a detailed explanation of the hardware configuration, see
Section 4.4.
WARNING: When the controlCARD
is used in a high-voltage setup, it is the user’s responsibility to confirm that the
voltages and isolation requirements are identified and understood prior to
energizing the board or simulation. When energized, the controlCARD or components
connected to the controlCARD should not be touched. Furthermore, the capacitor C7:A
should be removed to minimize the possibility of leakage current flowing across the
isolation barrier of the controlCARD.