SPRUJ74 January 2023
The J784S4XG01EVM board includes two Serial Ethernet Expansion connectors of 171446-1109 with 5-mm mating height, allowing the ENET expansion board (Quad-Port Ethernet Expansion) to be stacked on bottom side of the board.
This section provides an overview of the different interfaces and circuits on the Quad port Ethernet Expansion Board. The following table contains the Pin out/Signal mapping for the ENET Expansion connector.
PIN | Net Name | PIN | Net Name |
---|---|---|---|
1 | DGND | 31 | QSGMII_INTN |
2 | NC | 32 | DGND |
3 | NC | 33 | QSGMII4_TX_P |
4 | DGND | 34 | QSGMII4_TX_N |
5 | NC | 35 | DGND |
6 | NC | 36 | QSGMII4_RX_P |
7 | DGND | 37 | QSGMII4_RX_N |
8 | NC | 38 | DGND |
9 | NC | 39 | QSGMII_PHY_REFCLK_N |
10 | DGND | 40 | QSGMII_PHY_REFCLK_P |
11 | VSYS_IO_3V3 | 41 | DGND |
12 | VSYS_IO_3V3 | 42 | QSGMII_MDC |
13 | DGND | 43 | QSGMII_MDIO |
14 | EEPROM_A0 | 44 | DGND |
15 | EEPROM_A1 | 45 | QSGMII_RESETN |
16 | EEPROM_A2 | 46 | CDCI_I2C_SEL |
17 | DGND | 47 | ENET_EXP_SPARE |
18 | EEPROM_WP | 48 | DGND |
19 | REFCLK_25MHZ | 49 | VSYS_5V0 |
20 | DGND | 50 | VSYS_5V0 |
21 | WKUP_I2C0_SCL | 51 | DGND |
22 | WKUP_I2C0_SDA | 52 | NC |
23 | DGND | 53 | NC |
24 | I2C0_SCL | 54 | DGND |
25 | I2C0_SDA | 55 | VCC_3V3 |
26 | DGND | 56 | VCC_3V3 |
27 | VCC_12V0 | 57 | DGND |
28 | VCC_12V0 | 58 | NC |
29 | DGND | 59 | NC |
30 | ENET_EXP_PWRDN | 60 | DGND |
SH1 | DGND | SH2 | DGND |