4 Silicon Change Overview

Table 4-1 to Table 4-3 list the change(s) made to each silicon revision.

Table 4-1 TMS320F2809 Silicon Change Overview

REVISION	CHANGES MADE
A	The following advisory was fixed: "Input Clock: Device Startup Using XCLKIN Input".
0	First silicon release. (This is functionally equivalent to Revision C of the TMS320F280x silicon.)

Table 4-2 TMS320C2802 and TMS320C2801 Silicon Change Overview

REVISION	CHANGES MADE
A	TMS silicon (This is functionally equivalent to Revision C of the TMS320F280x silicon.)
0	First silicon release. (This is functionally equivalent to Revision B of the TMS320F280x silicon - TI Internal only)

Table 4-3 TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, and TMS320F2801x
Silicon Change Overview

REVISION	CHANGES MADE
C	The following advisories were fixed: Watchdog module limitation ADC crosstalk issue
B	First TMS silicon release. Flash tools: All flash tools must be updated to use F280x flash API v3.00 or later. This API is backward-compatible with all previous silicon versions. Previous API versions will no longer work. The default state of the internal pullup resistors for pins GPIO0 to GPIO11 changed from enabled to disabled. These pins correspond to ePWM output pins. The default state of the internal pullup resistors for pins GPIO12 to GPIO34 remains as enabled. The following advisory was fixed: GPIO pin behavior at power-up
A	The following advisories were fixed: Boot ROM – configuration of pins as asynchronous eCAN – boot mode in boot ROM ADC – Initial Conversion Latency
0	First silicon release.