米6体育平台手机版

SPRZ423K October 2014 – May 2024 TMS320F28075 , TMS320F28075-Q1 , TMS320F28076

1
Abstract
1Usage Notes and Advisories Matrices
1. 1.1 Usage Notes Matrix
2. 1.2 Advisories Matrix
2Nomenclature, Package Symbolization, and Revision Identification
3Silicon Revision C Usage Notes and Advisories
1. 3.1 Silicon Revision C Usage Notes
2. 3.2 Silicon Revision C Advisories
  1. Advisory
  2. Advisory
  3. Advisory
  4. Advisory
  5. Advisory
  6. Advisory
  7. Advisory
  8. Advisory
  9. Advisory
  10. Advisory
  11. Advisory
  12. Advisory
  13. Advisory
  14. Advisory
  15. Advisory
  16. Advisory
  17. Advisory
  18. Advisory
  19. Advisory
  20. Advisory
  21. Advisory
  22. Advisory
  23. Advisory
  24. Advisory
  25. Advisory
  26. Advisory
  27. Advisory
  28. Advisory
  29. Advisory
  30. Advisory
  31. Advisory
  32. Advisory
  33. Advisory
  34. Advisory
  35. Advisory
  36. Advisory
4Silicon Revision B Usage Notes and Advisories
1. 4.1 Silicon Revision B Usage Notes
2. 4.2 Silicon Revision B Advisories
  1. Advisory
  2. Advisory
  3. Advisory
  4. Advisory
  5. Advisory
  6. Advisory
  7. Advisory
  8. Advisory
  9. Advisory
5Documentation Support
6Trademarks
7Revision History

Advisory

Boot ROM: Device Will Hang During Boot if X1 Clock Source is not Present

Revisions Affected

Details

The device boot code will attempt to configure the device using X1 as the clock source. When X1 is not present, the device boot will hang. This advisory applies to any system which is designed to use the INTOSC as the primary clock source with no clock on X1 during boot. This issue only affects some silicon revision B devices and it will be fixed in all future silicon revisions.

Workarounds

Apply external clock source to X1 on silicon revision B devices, even if using INTOSC as the application clock source.