米6体育平台手机版

SPRZ423K October 2014 – May 2024 TMS320F28075 , TMS320F28075-Q1 , TMS320F28076

1
Abstract
1Usage Notes and Advisories Matrices
1. 1.1 Usage Notes Matrix
2. 1.2 Advisories Matrix
2Nomenclature, Package Symbolization, and Revision Identification
3Silicon Revision C Usage Notes and Advisories
1. 3.1 Silicon Revision C Usage Notes
2. 3.2 Silicon Revision C Advisories
  1. Advisory
  2. Advisory
  3. Advisory
  4. Advisory
  5. Advisory
  6. Advisory
  7. Advisory
  8. Advisory
  9. Advisory
  10. Advisory
  11. Advisory
  12. Advisory
  13. Advisory
  14. Advisory
  15. Advisory
  16. Advisory
  17. Advisory
  18. Advisory
  19. Advisory
  20. Advisory
  21. Advisory
  22. Advisory
  23. Advisory
  24. Advisory
  25. Advisory
  26. Advisory
  27. Advisory
  28. Advisory
  29. Advisory
  30. Advisory
  31. Advisory
  32. Advisory
  33. Advisory
  34. Advisory
  35. Advisory
  36. Advisory
4Silicon Revision B Usage Notes and Advisories
1. 4.1 Silicon Revision B Usage Notes
2. 4.2 Silicon Revision B Advisories
  1. Advisory
  2. Advisory
  3. Advisory
  4. Advisory
  5. Advisory
  6. Advisory
  7. Advisory
  8. Advisory
  9. Advisory
5Documentation Support
6Trademarks
7Revision History

Advisory

ePWM: Trip Events Will Not be Filtered by the Blanking Window for the First 3 Cycles After the Start of a Blanking Window

Revisions Affected

B, C

Details

The Blanking Window will not blank trip events for the first 3 cycles after the start of a Blanking Window. DCEVTFILT may continue to reflect changes in the DCxEVTy signals. If DCEVTFILT is enabled, this may impact subsequent subsystems that are configured (for example, the Trip Zone submodule, TZ interrupts, ADC SOC, or the PWM output).

Workarounds

Start the Blanking Window 3 cycles before blanking is required. If a Blanking Window is needed at a period boundary, start the Blanking Window 3 cycles before the beginning of the next period. This works because Blanking Windows persist across period boundaries.