米6体育平台手机版

SWRA751 September 2022

Description:

This command gets the Bluetooth channel index and ADPLL mode and sets the device to continuous reception at the selected frequency.

Table 3-11 Command Parameters HCI_VS_DRPb_Tester_Con_RX (0xFD17) Frequency, ADPLL loop mode

Command Parameter Size (bytes) Value Description

Frequency

0 - 78

Command Parameter	Size (bytes)	Value	Description
Frequency	1	0 - 78	Selects Bluetooth frequency channel for transmission. Frequency channel index (k), range 0 – 78 (decimal) `Freq = 2402 + 2k, for k = 0, 1, 2 … 39 Freq = 2403 + 2(k–40), for k = 40, 41…78`
ADPLL loop mode	1	0x00 0x01	Open Loop - Used during Scanning Modes, i.e. Inquiry Scan and Page Scan Close Loop - Used during Connection Modes, i.e. Active and Sniff Mode

Selects Bluetooth frequency channel for transmission. Frequency channel index (k), range 0 – 78 (decimal)

Freq = 2402 + 2k, for k = 0, 1, 2 … 39
Freq = 2403 + 2(k–40), for k = 40, 41…78

ADPLL loop mode

0x00

0x01

Open Loop - Used during Scanning Modes, i.e. Inquiry Scan and Page Scan

Close Loop - Used during Connection Modes, i.e. Active and Sniff Mode

Table 3-12 Return Parameters

Returned Value	Description	Size (bytes)	Events Generated
0x00 0x01 – 0xFF	Command succeeded. Command failed.	1	Command Complete