米6体育平台手机版

SWRU580 April 2021 CC2564C , CC2564MODA , CC2564MODN

Trademarks
1 Introduction
2 A2DP (AUD) Demo Guide
1. 2.1 Demo Overview
2. 2.2 Demo Application
3. 2.3 Application Commands
3 A3DP Sink Demo Guide
1. 3.1 Demo Overview
2. 3.2 Demo Application
3. 3.3 Sink Reference Board Demo Application
4. 3.4 Multiple Source Demo
5. 3.5 Application Commands
4 A3DP Source Demo Guide
1. 4.1 Demo Overview
2. 4.2 Demo Application
3. 4.3 Application Commands
5 HFP Demo Guide
1. 5.1 Demo Overview
2. 5.2 Demo Application
3. 5.3 Application Commands
6 HFP Audio Gateway Demo Guide
1. 6.1 Demo Overview
2. 6.2 Demo Application
3. 6.3 Application Commands
7 HID Demo Guide
1. 7.1 Demo Overview
2. 7.2 Demo Application
3. 7.3 Application Commands
8 HSP Demo Guide
1. 8.1 Demo Overview
2. 8.2 Demo Application
3. 8.3 Application Command
9 Map Demo Guide
1. 9.1 Demo Overview
2. 9.2 Demo Application
3. 9.3 Application Command
10PBAP Demo Guide
1. 10.1 Demo Overview
2. 10.2 Demo Application
3. 10.3 Application Commands
11SPP Demo Guide
1. 11.1 Demo Overview
2. 11.2 Demo Application
3. 11.3 Application Commands
12SPPLE Demo Guide
1. 12.1 Demo Overview
2. 12.2 Demo Application
3. 12.3 Demonstrating SPP LE on an iOS Device with the LightBlue App
4. 12.4 Demonstrating SPP LE on an iOS Device with the SPPLE Transfer App - LEGACY
5. 12.5 SPP Demo
6. 12.6 Application Commands
13SPPDMMulti Demo Guide
1. 13.1 Demo Overview
2. 13.2 Demo Application
3. 13.3 Application Commands
14ANP Demo Guide
1. 14.1 Demo Overview
2. 14.2 Demo Application
3. 14.3 Application Commands
15HFP Demo Guide
1. 15.1 Demo Overview
2. 15.2 Demo Application
3. 15.3 Application Commands
16HTP Demo Guide
1. 16.1 Demo Overview
2. 16.2 Demo Application
3. 16.3 Application Commands
17PASP Demo Guide
1. 17.1 Demo Overview
2. 17.2 Demo Application
3. 17.3 Application Commands
18HOGP Demo Guide
1. 18.1 Demo Overview
2. 18.2 Demo Application
3. 18.3 Application Commands
19PXP Demo Guide
1. 19.1 Demo Overview
2. 19.2 Demo Application
3. 19.3 Applications Commands
20FMP Demo Guide
1. 20.1 Demo Overview
2. 20.2 Demo Application
3. 20.3 Application Commands
21CSCP Demo Guide
1. 21.1 Demo Overview
2. 21.2 Demo Application
3. 21.3 Application Commands
22Revision History

11.1 Demo Overview

Note: The same instructions can be used to run this demo on the Tiva, MSP432 or STM32F4 Platforms.

This demo allows users to evaluate TI's CC256x Bluetooth device by using the PAN1323EMK, MSP-EXP430F5438 board, Tiva DK-TM4C129X, MSP432 or STM32F4. The SPP sample application code is provided to enable a rich out-of-box experience to the user. The application allows the user to use a console to send Bluetooth commands, setup a Bluetooth Device to accept connections, connect to a remote Bluetooth device and communicate over Bluetooth.

For information of the LE version of this profile, refer to the document SPP-LE profile.

It is recommended that the user visits the kit setup Getting Started Guide for MSP430, Getting Started Guide for TIVA, Getting Started Guide for MSP432 or Getting Started Guide for STM32F4 pages before trying the application described on this page.

Running the Bluetooth Code

Once the code is flashed, connect the board to a PC using a miniUSB or microUSB cable. Once connected, wait for the driver to install. It will show up as MSP-EXP430F5438 USB - Serial Port(COM x), Tiva Virtual COM Port (COM x), XDS110 Class Application/User UART (COM x) for MSP432, under Ports (COM & LPT) in the Device manager. Attach a Terminal program like PuTTY to the serial port x for the board. The serial parameters to use are 115200 Baud (9600 for MSP430), 8, n, 1. Once connected, reset the device using Reset S3 button (located next to the mini USB connector for the MSP430) and you should see the stack getting initialized on the terminal and the help screen will be displayed, which shows all of the commands.

Figure 11-1 SPP Demo Initial Screen of SPP Demo Application