The Assisted Advanced Audio
Distribution Profile (A3DP) Sink allows a device to act as an Audio sink and can
control and stream audio on an Audio source.
It is recommended that the user
visits the kit setup Getting Started Guide for MSP430, Getting Started Guide for Tiva, Getting Started Guide for MSP432 or Getting Started Guide for STM32F4 pages before trying
the application described on this page.
Note: The same instructions can be used to
run this demo on the Tiva, MSP432 or STM32F4 Platforms. An external codec MUST be
connected to the CC256x I2S/PCM interface to play audio except for the BT-MSPAUDSINK
Reference Design board.
Running the Bluetooth
Code Once the code is flashed, connect the board to a PC using a
miniUSB or microUSB cable. Once connected, wait for the driver to install. It will show
up as
MSP-EXP430F5438 USB - Serial Port(COM x), Tiva Virtual COM Port (COM x), XDS110
Class Application/User UART (COM x) for MSP432, under Ports (COM & LPT) in
the Device manager. Attach a Terminal program like PuTTY to the serial port x for the
board. The serial parameters to use are 115200 Baud (9600 for MSP430), 8, n, 1. Once
connected, reset the device using Reset S3 button (located next to the mini USB
connector for the MSP430) and you should see the stack getting initialized on the
terminal and the help screen will be displayed, which shows all of the commands