SWRU585 November 2021 IWR6843
- Trademarks
- 1Getting Started
- 2Hardware
- 3PCB Storage and Handling Recommendations
- 4IWR6843LEVM Antenna
-
5Hardware Details
- 5.1 Switch Settings
- 5.2 LEDs
- 5.3 Connectors
- 5.4 USB Connector
- 5.5 DCA1000 HD Connector
- 5.6 MMWAVEICBOOST HD Connector
- 5.7 CANFD Connector
- 5.8 I2C Connections
- 5.9 EEPROM
- 5.10 Default I2C Address
- 5.11 Modular Mode
- 5.12 Flashing the Board
- 5.13 DCA1000EVM Mode
- 5.14 MMWAVEICBOOST Mode
- 5.15 Raw ADC Data Capture Using MMWAVEICBOOST and DCA1000 EVMs
- 5.16 Muxing Scheme
- 6Software, Development Tools, and Example Code
- 7TI E2E Community
- 8References
5.13 DCA1000EVM Mode
The setup for raw data capture using DCA1000EVM is shown in Figure 5-9.
Figure 5-9 DCA1000EVM ModeS1 switch settings for this mode is shown in Table 5-6.
Table 5-6 S1 Configuration for
DCA1000EVM Mode
| S1.1 | S1.2 | S1.3 | S1.4 | S1.5 | S1.6 | |
|---|---|---|---|---|---|---|
| DCA1000EMV mode | Off | On | On | Off | Off | - |