SWRZ074C May 2017 – May 2021 IWR1443
Overshoot and Undershoot During Inter-Chirp Idle Time
IWR1443 ES1.0, ES2.0 and ES3.0
At the end of the chirp , when the synthesizer starts to go back to the start frequency of the next chirp, there is some overshoot and undershoot. The undershoot/overshoot is proportional to the chirp bandwidth. Negative slope chirps have a worse undershoot than positive slope chirps.
To ensure the TX power amplifier is OFF during chirp idle time and not causing "on-air" emissions during the undershoot/overshoot period, keep the inter-chirp power savings ON.