SWRZ075D May 2017 – December 2020 AWR1443
Bootup failure during the serial flash busy state
AWR1443 ES1.0, AWR1443 ES2.0, and AWR1443 ES3.0
If the radar device is rebooted internally or externally while the serial flash is busy completing a previous operation, like erase, format etc, the radar device might fail to bootup since the serial flash would not respond to the commands from the bootloader during the bootup process.
The user application should make sure if its triggering an internal reset due to watch dog expiry or other reasons, it should reset the serial flash to bring it to a known state or wait for completion of any pending issued commands to serial flash before it resets the AWR device.