Revision(s) Affected:

AWR294x ES2.0 Only

Description:

At the end of the last parameter-set of the last loop in low-priority context, if a context-switch happens to high priority, then an incorrect behavior is observed when returning back to low-priority. This incorrect behavior can manifest itself as a fresh (unintended) re-start of the low-priority loop once completed. Following are the erroneous conditions:

• CONTEXT_SW_EN or FORCED_CONTEXT_SW_EN set in the last paramset of the low priority thread.

Workaround(s):

It is recommended to not enable context switch in the last parameter-set of the above mentioned conditions. In case, the last parameter-set has to have context switch enabled, user could add a dummy parameter-set with context switch disabled as the last parameter-set.