TIDT200 September   2020

 

  1.   Description
  2. 1Test Prerequisites
    1. 1.1 Design Requirements
    2. 1.2 Required Equipment
    3. 1.3 Dimensions
  3. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
    3. 2.3 Load Regulation
    4. 2.4 Thermal Images
    5. 2.5 EMI
  4. 3Waveforms
    1. 3.1 Switching
    2. 3.2 Output Voltage Ripple
    3. 3.3 Load Transients
    4. 3.4 Start-up Sequence
    5. 3.5 Undervoltage Protection

Load Transients

Load transient response is shown in the following figures.

GUID-20200821-CA0I-WJTQ-Q09W-QGTS3DHWLHMJ-low.png
CH1: VPA_BUSCH4: IPA_BUS
Figure 3-7 PA_BUS 13.5V input, 0.75A->1.5A
GUID-20200821-CA0I-X268-XQBG-BBPPLVSJBRXW-low.png
CH1: VPB_BUSCH4: IPB_BUS
Figure 3-8 PB_BUS 13.5V input, 0.75A->1.5A
GUID-20200821-CA0I-DXJQ-3KWL-DH89FG3KQDDD-low.png
CH1: VPA_BUSCH4: IPA_BUS
Figure 3-9 PA_BUS 13.5V input,1.5A->2.25A
GUID-20200821-CA0I-DRNQ-3KPK-27CB8TCRBBW7-low.png
CH1: VPB_BUSCH4: IPB_BUS
Figure 3-10 PB_BUS 13.5V input, 1.5A->2.25A
GUID-20200821-CA0I-H9CZ-FDQQ-9N6HJGWDQ7LF-low.png
CH1: VPA_BUSCH4: IPA_BUS
Figure 3-11 PA_BUS 13.5V input, 0.15A->3A
GUID-20200821-CA0I-LXFR-LMQN-R76BJNLPVSGT-low.png
CH1: VPB_BUSCH4: IPB_BUS
Figure 3-12 PB_BUS 13.5V input, 0.15A->3A