米6体育平台手机版

TIDT234 November 2022

Description
Features
Applications
1Test Prerequisites
2Testing and Results
3Waveforms

1.3 Considerations

There are two revisions of this design: RevA which has the inductor mounted on the same side as the regulator and RevB, which has the inductor mounted on the bottom side of the regulator. The circuitry of both are exactly the same. Only the PCB layouts vary slightly. Unless otherwise noted, all tests are performed on the RevB board for this report.

Note: Since this is a pre-released IC, there are certain misbehaviors with the converter that are documented in the errata sheet, which are to be rectified before the release of the product. These misbehaviors have some effect on the switching, output ripple, and load transient response waveforms, and might also have influenced the EMI results, documented in this preliminary test report.