米6体育平台手机版

ZHCS488K October 2011 – December 2018 AM3351 , AM3352 , AM3354 , AM3356 , AM3357 , AM3358 , AM3359

PRODUCTION DATA.

NO.			OPP100		OPP50		UNIT
NO.			MIN	MAX	MIN	MAX	UNIT
FA5⁽¹⁾	t_acc(d)	Data access time		H⁽⁵⁾		H⁽⁵⁾	ns
FA20⁽²⁾	t_{acc1-pgmode(d)}	Page mode successive data access time		P⁽⁴⁾		P⁽⁴⁾	ns
FA21⁽³⁾	t_{acc2-pgmode(d)}	Page mode first data access time		H⁽⁵⁾		H⁽⁵⁾	ns

The FA5 parameter shows the amount of time required to internally sample input data. It is expressed in number of GPMC functional clock cycles. From start of read cycle and after FA5 functional clock cycles, input data is internally sampled by active functional clock edge. FA5 value must be stored inside the AccessTime register bit field.
The FA20 parameter shows amount of time required to internally sample successive input page data. It is expressed in number of GPMC functional clock cycles. After each access to input page data, next input page data is internally sampled by active functional clock edge after FA20 functional clock cycles. The FA20 value must be stored in the PageBurstAccessTime register bit field.
The FA21 parameter shows amount of time required to internally sample first input page data. It is expressed in number of GPMC functional clock cycles. From start of read cycle and after FA21 functional clock cycles, first input page data is internally sampled by active functional clock edge. FA21 value must be stored inside the AccessTime register bit field.
P = PageBurstAccessTime × (TimeParaGranularity + 1) × GPMC_FCLK⁽⁶⁾
H = AccessTime × (TimeParaGranularity + 1) × GPMC_FCLK⁽⁶⁾
GPMC_FCLK is general-purpose memory controller internal functional clock period in ns.