ZHCSFH5A March 2016 – September 2016 ISO7821LLS
PRODUCTION DATA.
- 1 特性
- 2 应用
- 3 说明
- 4 修订历史记录
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Power Ratings
- 6.6 Insulation Specifications
- 6.7 Safety-Related Certifications
- 6.8 Safety Limiting Values
- 6.9 DC Electrical Characteristics
- 6.10 DC Supply Current Characteristics
- 6.11 Timing Requirements for Distortion Correction Scheme
- 6.12 Switching Characteristics
- 6.13 Insulation Characteristics Curves
- 6.14 Typical Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12器件和文档支持
- 13机械、封装和可订购信息
7 Parameter Measurement Information
A. The input pulse is supplied by a generator having the following characteristics: PRR ≤ 50 kHz, 50% duty cycle, tr ≤ 3 ns, tf ≤ 3 ns, ZO = 50 Ω.
B. CP = 5 pF and includes instrumentation and fixture capacitance within ±20%.
Figure 19. Switching Characteristics Test Circuit and Voltage Waveforms
A. The input pulse is supplied by a generator having the following characteristics: PRR ≤ 10 kHz, 50% duty cycle,
tr ≤ 3 ns, tf ≤ 3 ns, ZO = 50 Ω.
tr ≤ 3 ns, tf ≤ 3 ns, ZO = 50 Ω.
B. CL = 5 pF and includes instrumentation and fixture capacitance within ±20%.
Figure 20. Enable and Disable Propagation Delay Time Test Circuit and Waveform
A. CL = 5 pF and includes instrumentation and fixture capacitance within ±20%.
Figure 21. Default Output Delay Time Test Circuit and Voltage Waveforms
A. CL = 5 pF and includes instrumentation and fixture capacitance within ±20%.
Figure 22. Common-Mode Transient Immunity Test Circuit
Figure 23. Driver Test Circuit
Figure 24. Voltage Definitions and Waveforms