米6体育平台手机版

ZHCSGV0F July 2017 – December 2021 TPS22916

PRODUCTION DATA

6.6 Switching Characteristics

Unless otherwise noted, the typical characteristics in the following table applies over the entire recommended power supply voltage range of 1 V to 5.5 V at 25°C with a load of C_L = 0.1µF, R_L = 10Ω.

PARAMETER		TEST CONDITIONS	TYP	UNIT
TPS22916B, TPS22916BL
t_ON	Turn On Time	V_IN = 5 V	115	µs
		V_IN = 3.6 V	140
		V_IN = 1.8 V	250
		V_IN = 1.2 V	350
		V_IN = 1 V	510
t_RISE	Rise Time	V_IN = 5 V	70	µs
		V_IN = 3.6 V	80
		V_IN = 1.8 V	130
		V_IN = 1.2 V	190
		V_IN = 1 V	240
SR_ON	Slew Rate	V_IN = 5 V	57	mV/µs
		V_IN = 3.6 V	36
		V_IN = 1.8 V	12
		V_IN = 1.2 V	5.1
		V_IN = 1 V	3.3
t_OFF	Turn Off Time	V_IN = 5 V	5	µs
		V_IN = 3.6 V	5
		V_IN = 1.8 V	10
		V_IN = 1.2 V	15
		V_IN = 1 V	25
t_FALL	Fall Time	C_L = 0.1 µF, R_L = 10 Ω⁽¹⁾	2.3	µs
t_FALL	Fall Time	C_L = 1µF, R_L = Open⁽¹⁾	315	µs
TPS22916C, TPS22916CN, TPS22916CL, TPS22916CNL
t_ON	Turn On Time	V_IN = 5 V	1400	µs
		V_IN = 3.6 V	1700
		V_IN = 1.8 V	3000
		V_IN = 1.2 V	5000
		V_IN = 1 V	6500
t_RISE	Rise Time	V_IN = 5 V	800	µs
		V_IN = 3.6 V	900
		V_IN = 1.8 V	1400
		V_IN = 1.2 V	2300
		V_IN = 1 V	3000
SR_ON	Slew Rate	V_IN = 5 V	5	mV/µs
		V_IN = 3.6 V	3.2
		V_IN = 1.8 V	1
		V_IN = 1.2 V	0.4
		V_IN = 1 V	0.3
t_OFF	Turn Off Time	V_IN = 5 V	5	µs
		V_IN = 3.6 V	5
		V_IN = 1.8 V	10
		V_IN = 1.2 V	15
		V_IN = 1 V	25
t_FALL	Fall Time⁽²⁾	C_L = 0.1 µF, R_L = 10 Ω⁽¹⁾	2.3	µs
t_FALL	Fall Time⁽²⁾	CL = 10µF, RL = Open⁽¹⁾	3150	µs

(1) See the Fall Time (t_FALL) and Quick Output Discharge (QOD) section for information on how R_L and C_L affect Fall Time.

(2) Devices without Quick Output Discharge (QOD) may not discharge completely.