ZHCSH63B October   2017  – January 2020 TLC6C5816-Q1

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     典型应用原理图
  4. 修订历史记录
  5. Pin Configuration and Functions
    1.     Pin Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Device Enable (EN)
      2. 7.3.2 Gated Output (Gx)
      3. 7.3.3 Register Clear (CLR)
      4. 7.3.4 Open-Drain Outputs and Flexible Diagnostics Channel
        1. 7.3.4.1 Configurable Outputs
        2. 7.3.4.2 LED-Open Diagnostics
        3. 7.3.4.3 LED-Short Diagnostics
      5. 7.3.5 Thermal Shutdown
      6. 7.3.6 Command Error
      7. 7.3.7 Serial Communication Error
      8. 7.3.8 Error Feedback
      9. 7.3.9 Interface
        1. 7.3.9.1 Register Write
        2. 7.3.9.2 Register Read
        3. 7.3.9.3 Shift-Register Communication-Fault Detection
        4. 7.3.9.4 Clear Register
        5. 7.3.9.5 Register Clock
    4. 7.4 Device Functional Modes
      1. 7.4.1 Normal Operation
      2. 7.4.2 POR Reset
      3. 7.4.3 Standby Mode
    5. 7.5 Register Maps
    6. 7.6 Interface Registers
      1. 7.6.1 Configuration Register (Offset = 0h) [reset = 0h]
        1. Table 5. Configuration Register Field Descriptions
      2. 7.6.2 Fault Readback Register (Offset = 1h) [reset = 0h]
        1. Table 6. Fault Readback Register Field Descriptions
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11器件和文档支持
    1. 11.1 接收文档更新通知
    2. 11.2 社区资源
    3. 11.3 商标
    4. 11.4 静电放电警告
    5. 11.5 Glossary
  12. 12机械、封装和可订购信息

Switching Characteristics

Vcc = 5 V, TJ = 25ºC, CL = 30 pF, ID = 20 mA unless otherwise specified
PARAMETER MIN TYP MAX UNIT
tpd(deg_open) LED open to ERR pin pulled down time 35 µs
tpd(deg_short) LED short to ERR pin pulled down time 35 µs
tpd(GOFF) Propagation delay time, output off (VOUT equals 10% LED supply voltage) from Gx rising 250 ns
tpd(GON) Propagation delay time, output on (VOUT equals 90% LED supply voltage) from Gx falling 250 ns
tpd(ROFF) Propagation delay time, output off (VOUT equals 10% LED supply voltage) from RCK rising 250 ns
tpd(RON) Propagation delay time, output on (VOUT equals 90% LED supply voltage) from RCK rising 250 ns
tr Rise time, drain output 100 ns
tf Fall time, drain output 100 ns
tpd(SIO) Propagation delay time, SRCK falling edge to SEROUT change 35 ns
tr(o) SEROUT rise time (10% to 90%) 20 ns
tf(o) SEROUT fall time (90% to 10%) 20 ns
TLC6C5816-Q1 Input-Timing-SLASEJ5.gifFigure 1. Timing Diagram of Input Signals
TLC6C5816-Q1 Output-Timing-SLASEJ5.gifFigure 2. Timing Diagram of Output Signals